Clamp Meter Digital - AC/DC Current Electrical Tester

The Digital Clamp Meter MK06 boasts a comprehensive range of features, including full protection, a streamlined design, and a 1.5V battery-powered operation. It can measure AC/DC current, automatically shut off, and offers a highlighted backlight, NCV test, and low voltage display, as well as data retention capabilities.

To measure current, the user must clamp the meter around a single wire, not the entire power cord. This is because the power cord contains two current-carrying wires and a ground wire, and the current in the two wires flows in opposite directions, causing the magnetic fields to cancel each other out, resulting in a 0A reading.

When measuring a specific current-carrying conductor, it is important to ensure that the conductor is placed in the center of the clamp to avoid additional errors.

The Digital Clamp Meter MK06 offers a wide range of measurement capabilities, including:

DC Voltage: 400mV/4V/40V/400V ± (0.8% rdg + 2 dgt), 600V ± (1.0% rdg + 2 dgt) AC Voltage: 4V/40V/400V/600V ± (1.2% rdg + 10dgt) DC Current: 40A/400A ± (3.0% rdg + 6 dgt) AC Current: 40A/400A ± (3.0% rdg + 6 dgt) Resistance: 400Ω/4kΩ/40kΩ/400kΩ/4MΩ ± (1.2% rdg + 2 dgt), 40MΩ ± (2.0% rdg + 5 dgt) Capacitance: 40nF/400nF/4uF/40uF/400uF/4mF ± (3.0% rdg + 10dgt) Frequency: 40Hz/400Hz/4kHz/40kHz/400kHz/4MHz ± (1.0% rdg + 3 dgt) Duty-Cycle: 0.1%-99.99% ± (3.0% rdg + 3 dgt)

The device features a maximum display value of 3999 counts and a maximum allowable voltage between the measuring terminal and earth of 600V DC or 600V AC RMS. It has a 3/4-digit LCD display with overrange indication and automatic polarity detection.

The Digital Clamp Meter MK06 also boasts a multi-function button that allows for one-click switching between resistance, capacitance, diode, and continuity measurements, making it easy to use in various settings, such as factories, laboratories, and homes.

Additionally, the "SEL" button enables users to switch between different measurement functions, and the LCD display provides low power indication, auto power-off indication, diode test, continuity check, data hold, and clear display of measured signal units, DC/AC signals, and negative polarity.

Compared to other models, the MK06 offers a classic design, while the FY372B, FY375, FY157B, FY02A, and FY77 provide additional features and functionalities, such as higher maximum display values, expanded current measurement ranges, and temperature measurement capabilities. Customers can choose the model that best suits their specific needs and requirements.

product information: